 |
| Quantity: | |
|---|---|
WR-8969D Water Base Yangbuck Resin(Middle-Coarse)
水性羊巴树脂(中粗)
PRODUCT NAME | WR-8969D |
外观 APPEARANCE | 微黄液体 Light yellow liquid |
主成份 MAIN COMPONENT | PU水性树脂 PU water base resin |
不挥发成份 SOLID CONTENT(%) | 25±1 |
溶剂 SOLVENT | 纯净水 Pure water |
粘度 VISCOSITY(mPa·s/25℃) | 3000-4000 |
PROPERTIES & NOTES：
本品适用于PU皮直涂或高固印刷工艺,使用前搅拌均匀,如需稀释,请用纯净水,颜料应选用水性体系,否则会有不溶性,颜料添加量请自行调整,烘干温度选择120℃，60-90秒为宜,再经170-180℃x60-90秒发泡即可
This product is suitable for PU leather straight coating or high solid printing process, stir evenly before using. If dilution is required, use pure water. The pigment should be water-based system, otherwise it will be insoluble. The amount of pigment added should be adjusted by yourself. The drying temperature should be 120°C x 60-90s, and then170-180°C x 60-90s foaming.
WR-8969D Water Base Yangbuck Resin(Middle-Coarse)
水性羊巴树脂(中粗)
PRODUCT NAME | WR-8969D |
外观 APPEARANCE | 微黄液体 Light yellow liquid |
主成份 MAIN COMPONENT | PU水性树脂 PU water base resin |
不挥发成份 SOLID CONTENT(%) | 25±1 |
溶剂 SOLVENT | 纯净水 Pure water |
粘度 VISCOSITY(mPa·s/25℃) | 3000-4000 |
PROPERTIES & NOTES：
本品适用于PU皮直涂或高固印刷工艺,使用前搅拌均匀,如需稀释,请用纯净水,颜料应选用水性体系,否则会有不溶性,颜料添加量请自行调整,烘干温度选择120℃，60-90秒为宜,再经170-180℃x60-90秒发泡即可
This product is suitable for PU leather straight coating or high solid printing process, stir evenly before using. If dilution is required, use pure water. The pigment should be water-based system, otherwise it will be insoluble. The amount of pigment added should be adjusted by yourself. The drying temperature should be 120°C x 60-90s, and then170-180°C x 60-90s foaming.
