 |
| Quantity: | |
|---|---|
DESCRIPTION：
WR-8968D Water Base Yangbuck Resin(Fine Foaming)
PRODUCT NAME | WR-8968D |
APPEARANCE | Light yellow liquid |
MAIN COMPONENT | PU water base resin |
SOLID CONTENT(%) | 25±1 |
SOLVENT | Pure water |
VISCOSITY(mPa·s/25℃) | 3000-4000 |
PROPERTIES & NOTES：
A. This product is suitable for PU leather straight coating or high solid printing process, stir evenly before using. If dilution is required, use pure water. The pigment should be water-based system, otherwise it will be insoluble. The amount of pigment added should be adjusted by yourself. The drying temperature should be 120°C x 60-90s, and then170-180°C x 60-90s foaming.
A.本品适用于PU皮直涂或高固印刷工艺,使用前搅拌均匀,如需稀释,请用纯净水,颜料应选用水性体系,否则会有不溶性,颜料添加量请自行调整,烘干温度选择120℃，60-90秒为宜,再经170-180℃x60-90秒发泡即可
B. Safe shelf life:2 months(Over 2 months please test it before using).
C. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
DESCRIPTION：
WR-8968D Water Base Yangbuck Resin(Fine Foaming)
PRODUCT NAME | WR-8968D |
APPEARANCE | Light yellow liquid |
MAIN COMPONENT | PU water base resin |
SOLID CONTENT(%) | 25±1 |
SOLVENT | Pure water |
VISCOSITY(mPa·s/25℃) | 3000-4000 |
PROPERTIES & NOTES：
A. This product is suitable for PU leather straight coating or high solid printing process, stir evenly before using. If dilution is required, use pure water. The pigment should be water-based system, otherwise it will be insoluble. The amount of pigment added should be adjusted by yourself. The drying temperature should be 120°C x 60-90s, and then170-180°C x 60-90s foaming.
A.本品适用于PU皮直涂或高固印刷工艺,使用前搅拌均匀,如需稀释,请用纯净水,颜料应选用水性体系,否则会有不溶性,颜料添加量请自行调整,烘干温度选择120℃，60-90秒为宜,再经170-180℃x60-90秒发泡即可
B. Safe shelf life:2 months(Over 2 months please test it before using).
C. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
