 |
| Quantity: | |
|---|---|
DESCRIPTION：
WR-8966H Water Base Low-temperature Super Fine Yangbuck Resin
水性低温超细羊巴树脂
PRODUCT NAME | WR-8966H |
APPEARANCE | Light yellow liquid |
MAIN COMPONENT | PU water base resin |
SOLID CONTENT(%) | 28±1 |
SOLVENT | Pure water |
VISCOSITY(mPa·s/25℃) | 2000-3000 |
PROPERTIES & NOTES：
A.本剂适用于PVC皮高固印剧表处工艺,使用前搅拌均匀,如需稀释,请用纯净水
B.颜料应选用水性体系,否则会有不溶性,颜料添加量请自行调整
C.印刷或高固处理后100℃烘干,再经140-145℃x60秒发泡即可
D.安全保质期:二个月(超过二个月请试验后再使用)
E.贮存条件:使用后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)
A. This product is suitable for PVC leather high solid printing surface treating process, stir evenly before using. If dilution is required, use pure water.
B. The pigment should be water-based system, otherwise it will be insoluble. The amount of pigment added should be adjusted by yourself.
C. After printing or high solid treating,use 100°C to dry, then 140-145°C x 60s foaming.
D. Safe shelf life:2 months(Over 2 months please test it before using).
E. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
DESCRIPTION：
WR-8966H Water Base Low-temperature Super Fine Yangbuck Resin
水性低温超细羊巴树脂
PRODUCT NAME | WR-8966H |
APPEARANCE | Light yellow liquid |
MAIN COMPONENT | PU water base resin |
SOLID CONTENT(%) | 28±1 |
SOLVENT | Pure water |
VISCOSITY(mPa·s/25℃) | 2000-3000 |
PROPERTIES & NOTES：
A.本剂适用于PVC皮高固印剧表处工艺,使用前搅拌均匀,如需稀释,请用纯净水
B.颜料应选用水性体系,否则会有不溶性,颜料添加量请自行调整
C.印刷或高固处理后100℃烘干,再经140-145℃x60秒发泡即可
D.安全保质期:二个月(超过二个月请试验后再使用)
E.贮存条件:使用后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)
A. This product is suitable for PVC leather high solid printing surface treating process, stir evenly before using. If dilution is required, use pure water.
B. The pigment should be water-based system, otherwise it will be insoluble. The amount of pigment added should be adjusted by yourself.
C. After printing or high solid treating,use 100°C to dry, then 140-145°C x 60s foaming.
D. Safe shelf life:2 months(Over 2 months please test it before using).
E. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
