 |
| Quantity: | |
|---|---|
DESCRIPTION：
HG-1691P PVC Glossy Treatment Agent After Treating
HG-1691P PVC亮面后处理剂
PRODUCT NAME | |
APPEARANCE | transparent liquid |
MAIN COMPONENT | PVC resin |
SOLID CONTENT(%) | 16.5±1 |
SOLVENT | MEK/TOL |
VISCOSITY(mPa·s/25℃) | 80-140 |
PROPERTIES & NOTES：
A.本剂为PVC亮面后处理剂，适合于100以下PVC皮表面处理，不能用于PU皮表面处理，皮革经表处后，抗粘性好，透明度好，光泽均匀，伸不泛白，不耐溶剂，不能用于深纹处理，不可用于前处理
A. This agent is PVC Glossy Treatment Agent After Treating, suit for below 100 PVC leather surface treating, but not suit for PU leather surface treating.After treating,it’s good transparent,good resistance to sticky.The luster is uniform. Tensile white, solvent resistant. Not for deep grain processing, not for pre-processing
B.以轮表机选择100-120目表处1-2次，120℃x30"-1’确保完全烘干，稀释溶剂为MEK、TOL
B. Usually use printing machine:100-120 mesh for once to twice or roller coating,120°C x30s to dry this. Diluent solvent:MEK /TOL.
C.本剂可单独使用或同本公司PVC雾面HF-1692P互配使用，PU系列产品或他厂产品切勿混合使用
C. This agent can be used with HF-1692P to adjust the gloss and haze.Please do not use with other factory products.This agent can't be used in deep groove leather.
D.剂在70℃恒温，3Kg压力压4小时后皮的表面可能发粘,请先测试再使用，本剂在表处后用于压高遇波时，请先测试再使用
D. This product at 70°C constant temperature, 3KG pressure for 4 hours, the surface of the skin may be sticky. Please test before use.This agent are no temperature resistance,please do not using for pretreatment.
E.本剂在低温或存放时间过长，粘度可能会升高，请先搅均匀，使用时请注意空气和剂中水份，防止皮革表面产生白化现象。安全保质期:六个月(超过六个月请试验后再使用)
E. Pay attention to the air and the water which in the solvent to avoid leather surface whitening.Safe shelf life: 6 months(Over 6 months please test it before using).
F.贮存条件:本剂严禁烟火，使用前后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)
F. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
DESCRIPTION：
HG-1691P PVC Glossy Treatment Agent After Treating
HG-1691P PVC亮面后处理剂
PRODUCT NAME | |
APPEARANCE | transparent liquid |
MAIN COMPONENT | PVC resin |
SOLID CONTENT(%) | 16.5±1 |
SOLVENT | MEK/TOL |
VISCOSITY(mPa·s/25℃) | 80-140 |
PROPERTIES & NOTES：
A.本剂为PVC亮面后处理剂，适合于100以下PVC皮表面处理，不能用于PU皮表面处理，皮革经表处后，抗粘性好，透明度好，光泽均匀，伸不泛白，不耐溶剂，不能用于深纹处理，不可用于前处理
A. This agent is PVC Glossy Treatment Agent After Treating, suit for below 100 PVC leather surface treating, but not suit for PU leather surface treating.After treating,it’s good transparent,good resistance to sticky.The luster is uniform. Tensile white, solvent resistant. Not for deep grain processing, not for pre-processing
B.以轮表机选择100-120目表处1-2次，120℃x30"-1’确保完全烘干，稀释溶剂为MEK、TOL
B. Usually use printing machine:100-120 mesh for once to twice or roller coating,120°C x30s to dry this. Diluent solvent:MEK /TOL.
C.本剂可单独使用或同本公司PVC雾面HF-1692P互配使用，PU系列产品或他厂产品切勿混合使用
C. This agent can be used with HF-1692P to adjust the gloss and haze.Please do not use with other factory products.This agent can't be used in deep groove leather.
D.剂在70℃恒温，3Kg压力压4小时后皮的表面可能发粘,请先测试再使用，本剂在表处后用于压高遇波时，请先测试再使用
D. This product at 70°C constant temperature, 3KG pressure for 4 hours, the surface of the skin may be sticky. Please test before use.This agent are no temperature resistance,please do not using for pretreatment.
E.本剂在低温或存放时间过长，粘度可能会升高，请先搅均匀，使用时请注意空气和剂中水份，防止皮革表面产生白化现象。安全保质期:六个月(超过六个月请试验后再使用)
E. Pay attention to the air and the water which in the solvent to avoid leather surface whitening.Safe shelf life: 6 months(Over 6 months please test it before using).
F.贮存条件:本剂严禁烟火，使用前后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)
F. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
