 |
| Quantity: | |
|---|---|
DESCRIPTION：
BR-8871B Hot melt bonding agent
PRODUCT NAME | |
APPEARANCE | transparent liquid |
MAIN COMPONENT | PU resin |
SOLID CONTENT(%) | 25±1 |
VISCOSITY(mPa·s/25℃) | 6000-10000 |
SOLVENT | DMF/MAC/DMC |
PROPERTIES & NOTES：
A.本品为热熔接着剂，热熔接着力强:适合于PVC和尼龙绸，金银膜与PU、PVC革的贴合
A. The agent is Hot melt bonding agent.Hot weld strength. Suitable for PVC and nylon silk, gold and silver film and PU, PVC leather bonding.
B.本品苯类含量≤200ppm
B. Benzene content of this product ≤200ppm.
C.根据面料表面耐溶剂性调整稀释溶剂，可用不同比例DMC/EAC/WEK单一溶剂或者组合
C. The dilution solvent can be adjusted according to the solvent resistance of the fabric surface, and different proportions of DMC/EAC/MEK can be used as a single solvent or a combination.
D.安全保质期:三个月(超过三个月请试验后再使用)
D. Safe shelf life: 3 months(Over 3 months please test it before using).
E.贮存条件:本剂严禁烟火，使用后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)。
E. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
G.本品可加入我司固化剂QT-4996A，加了固化剂后需在4小时内用完液体料。加了固化剂后涂布的基材，必须放置阴凉处并在12小时内贴合完毕。
G. This product can be added to our curing agent QT-4996A, after adding curing agent need to use up the liquid material within 4 hours. After the curing agent is added, the coated substrate must be placed in a cool place and finished within 12 hours.
DESCRIPTION：
BR-8871B Hot melt bonding agent
PRODUCT NAME | |
APPEARANCE | transparent liquid |
MAIN COMPONENT | PU resin |
SOLID CONTENT(%) | 25±1 |
VISCOSITY(mPa·s/25℃) | 6000-10000 |
SOLVENT | DMF/MAC/DMC |
PROPERTIES & NOTES：
A.本品为热熔接着剂，热熔接着力强:适合于PVC和尼龙绸，金银膜与PU、PVC革的贴合
A. The agent is Hot melt bonding agent.Hot weld strength. Suitable for PVC and nylon silk, gold and silver film and PU, PVC leather bonding.
B.本品苯类含量≤200ppm
B. Benzene content of this product ≤200ppm.
C.根据面料表面耐溶剂性调整稀释溶剂，可用不同比例DMC/EAC/WEK单一溶剂或者组合
C. The dilution solvent can be adjusted according to the solvent resistance of the fabric surface, and different proportions of DMC/EAC/MEK can be used as a single solvent or a combination.
D.安全保质期:三个月(超过三个月请试验后再使用)
D. Safe shelf life: 3 months(Over 3 months please test it before using).
E.贮存条件:本剂严禁烟火，使用后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)。
E. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
G.本品可加入我司固化剂QT-4996A，加了固化剂后需在4小时内用完液体料。加了固化剂后涂布的基材，必须放置阴凉处并在12小时内贴合完毕。
G. This product can be added to our curing agent QT-4996A, after adding curing agent need to use up the liquid material within 4 hours. After the curing agent is added, the coated substrate must be placed in a cool place and finished within 12 hours.
