 |
| Quantity: | |
|---|---|
PRODUCT NAME | |
APPEARANCE | White liquid |
MAIN COMPONENT | PU resin |
SOLID CONTENT(%) | 32.5±1 |
VISCOSITY(mPa·s/25℃) | 6000-9000 |
SOLVENT | DMF/MEK/TOL |
PROPERTIES & NOTES：
A.为低模量变色用树脂，耐温约140℃，不可压花，完成的皮革具有屈曲时变色效果强烈，展色性好
A. The agent is Low modulus change color resin.The temperature is about 140°C, can not be embossed, and the finished leather has a strong discoloration effect when buckling and good color distribution.
B.使用前请充分搅拌，加入适当的水品色粉，一般为(3-5%)因颜料的添加量与变色的程度有关联之故，请自行调整颜料的比例，涂布量建议12-15条
B. Stir well before use and add appropriate crystal toner, generally 3-5%. Because the amount of pigment added is related to the degree of discoloration, please adjust the pigment ratio yourself. The recommended amount of coating is 12-15.
C.建议在变色层上再加一层PU保护层，增加耐刮,耐溶剂要求方面,请自行测试确认
C. It is recommended to add a layer of PU protective layer on the discolored layer, and to increase the scratch resistance and solvent resistance requirements, please test yourself.
D. Safe shelf life: 3 months(Over 3 months please test it before using).
E. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
PRODUCT NAME | |
APPEARANCE | White liquid |
MAIN COMPONENT | PU resin |
SOLID CONTENT(%) | 32.5±1 |
VISCOSITY(mPa·s/25℃) | 6000-9000 |
SOLVENT | DMF/MEK/TOL |
PROPERTIES & NOTES：
A.为低模量变色用树脂，耐温约140℃，不可压花，完成的皮革具有屈曲时变色效果强烈，展色性好
A. The agent is Low modulus change color resin.The temperature is about 140°C, can not be embossed, and the finished leather has a strong discoloration effect when buckling and good color distribution.
B.使用前请充分搅拌，加入适当的水品色粉，一般为(3-5%)因颜料的添加量与变色的程度有关联之故，请自行调整颜料的比例，涂布量建议12-15条
B. Stir well before use and add appropriate crystal toner, generally 3-5%. Because the amount of pigment added is related to the degree of discoloration, please adjust the pigment ratio yourself. The recommended amount of coating is 12-15.
C.建议在变色层上再加一层PU保护层，增加耐刮,耐溶剂要求方面,请自行测试确认
C. It is recommended to add a layer of PU protective layer on the discolored layer, and to increase the scratch resistance and solvent resistance requirements, please test yourself.
D. Safe shelf life: 3 months(Over 3 months please test it before using).
E. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
