 |
| Quantity: | |
|---|---|
| Product Name | BG-7964D |
| Appearance | translucence liquid |
| Main component | gloss co-polycondensation resin |
| Non-volatile component(%) | 32±1 |
| Viscosity(mPa·s/25℃) | 200-600 |
| Solvent | DB |
A.Using for leather surface anti-fouling.After treating,the artifical leather would have good oil resistance effect and easy to clean,good alcohol tolerance,the anti-yellowing is 3-3.5 level.Use light substrates with caution.
B.It should be used with the 10% curing agent QT-4104Y.If add the color,please mix the color sample to test. When batching, materials except curing agent should be prepared before adding curing agent. Samples with curing agent should be used up within 12 hours.
C.This agent can be used with our BF-7963D ,please stir it before using.It's suggested to use the matt primer then use the anti-fouling treatment agent to print by the 100-200mesh knife coating.It can not be recoated.
| Product Name | BG-7964D |
| Appearance | translucence liquid |
| Main component | gloss co-polycondensation resin |
| Non-volatile component(%) | 32±1 |
| Viscosity(mPa·s/25℃) | 200-600 |
| Solvent | DB |
A.Using for leather surface anti-fouling.After treating,the artifical leather would have good oil resistance effect and easy to clean,good alcohol tolerance,the anti-yellowing is 3-3.5 level.Use light substrates with caution.
B.It should be used with the 10% curing agent QT-4104Y.If add the color,please mix the color sample to test. When batching, materials except curing agent should be prepared before adding curing agent. Samples with curing agent should be used up within 12 hours.
C.This agent can be used with our BF-7963D ,please stir it before using.It's suggested to use the matt primer then use the anti-fouling treatment agent to print by the 100-200mesh knife coating.It can not be recoated.
