 |
| Quantity: | |
|---|---|
| Product Name | BG-7963D |
| Appearance | translucence liquid |
| Main component | gloss co-polycondensation resin |
| Non-volatile component(%) | 32±1 |
| Viscosity(mPa·s/25℃) | 100-400 |
| Solvent | DB |
A.本品用于皮革表面防污,经处理的人造革具有表面防油污易清洁效果，耐酒精性能良好A.耐黄变等级3-3.5级，浅色基材慎用;
B.本品需与QT-4104Y固化剂配合使用，固化剂用量为10%，如有加颜料，请先配小样调好色相，再进行生产配制，配料时应将除固化剂外的物料先配好后才加入固化剂，已加固化剂的样品请于12h内用完;
C.本品可与本公司BF-7964A配合使用，使用前请先搅拌均匀，建议先使用雾面处理剂打底处理后再使用防污处理剂100-120目刮刀处理一次，不能重涂;
A.Using for leather surface anti-fouling.After treating,the artifical leather would have good oil resistance effect and easy to clean,good alcohol tolerance,the anti-yellowing is 3-3.5 level.Use light substrates with caution.
B.It should be used with the 10% curing agent QT-4104Y.
C.This agent can be used with our BF-7964D ,please stir it before using.It's suggested to use the matt primer then use the anti-fouling treatment agent to print by the 100-200mesh knife coating.It can not be recoated.
| Product Name | BG-7963D |
| Appearance | translucence liquid |
| Main component | gloss co-polycondensation resin |
| Non-volatile component(%) | 32±1 |
| Viscosity(mPa·s/25℃) | 100-400 |
| Solvent | DB |
A.本品用于皮革表面防污,经处理的人造革具有表面防油污易清洁效果，耐酒精性能良好A.耐黄变等级3-3.5级，浅色基材慎用;
B.本品需与QT-4104Y固化剂配合使用，固化剂用量为10%，如有加颜料，请先配小样调好色相，再进行生产配制，配料时应将除固化剂外的物料先配好后才加入固化剂，已加固化剂的样品请于12h内用完;
C.本品可与本公司BF-7964A配合使用，使用前请先搅拌均匀，建议先使用雾面处理剂打底处理后再使用防污处理剂100-120目刮刀处理一次，不能重涂;
A.Using for leather surface anti-fouling.After treating,the artifical leather would have good oil resistance effect and easy to clean,good alcohol tolerance,the anti-yellowing is 3-3.5 level.Use light substrates with caution.
B.It should be used with the 10% curing agent QT-4104Y.
C.This agent can be used with our BF-7964D ,please stir it before using.It's suggested to use the matt primer then use the anti-fouling treatment agent to print by the 100-200mesh knife coating.It can not be recoated.
