 |
| Quantity: | |
|---|---|
DESCRIPTION：
BF-9766A Injectable Down pile making Yangbuck Resin
PRODUCT NAME | BF-9766A |
APPEARANCE | Light yellow liquid |
MAIN COMPONENT | PU resin |
SOLID CONTENT(%) | 18±1 |
SOLVENT | MEK/TOL |
VISCOSITY(mPa·s/25℃) | 2500-3500 |
PROPERTIES & NOTES：
特性及使用注意事项
A.使用PUTyPe有机色音或色料，色料应先用MEK溶解后加入，搅拌均匀
B.色料加入量一般为3-7%可根据具体要求调整
C.用于PU湿式Base，Coating0,2~0.3mPU皮或湿式Base，经110~120℃烘干，再经170℃~180℃x90S加热完成:完成的皮革，可经表面处理剂处理，效果更佳
D.注明:不能用DMF稀释，会影响发泡效
E.安全保质期:两个月(超过两个月请试验后使用)
F.贮存条件:使用后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)。
A. Use PU Type organic color paste or color, color should be dissolved with MEK before adding, stirring well.
B. The usually amount of color is 3-7%, which can be adjusted according to specific requirements.
C. Using for PU wet type Base.Coating 0.2-0.3mm PU leather or wet type Base.110-120°C to dry→170-180°C X 90s to heat.
D. The finished leather can be treated with a surface treatment agent for better results.
E. Note: Do not use DMF dilution, it will affect the foaming effect.
F. Safe shelf life: 2 months(Over 2 months please test it before using).
G. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
DESCRIPTION：
BF-9766A Injectable Down pile making Yangbuck Resin
PRODUCT NAME | BF-9766A |
APPEARANCE | Light yellow liquid |
MAIN COMPONENT | PU resin |
SOLID CONTENT(%) | 18±1 |
SOLVENT | MEK/TOL |
VISCOSITY(mPa·s/25℃) | 2500-3500 |
PROPERTIES & NOTES：
特性及使用注意事项
A.使用PUTyPe有机色音或色料，色料应先用MEK溶解后加入，搅拌均匀
B.色料加入量一般为3-7%可根据具体要求调整
C.用于PU湿式Base，Coating0,2~0.3mPU皮或湿式Base，经110~120℃烘干，再经170℃~180℃x90S加热完成:完成的皮革，可经表面处理剂处理，效果更佳
D.注明:不能用DMF稀释，会影响发泡效
E.安全保质期:两个月(超过两个月请试验后使用)
F.贮存条件:使用后请密封好，放于阴凉通风处，避免阳光直射(否则产品质量会受到严重影响)。
A. Use PU Type organic color paste or color, color should be dissolved with MEK before adding, stirring well.
B. The usually amount of color is 3-7%, which can be adjusted according to specific requirements.
C. Using for PU wet type Base.Coating 0.2-0.3mm PU leather or wet type Base.110-120°C to dry→170-180°C X 90s to heat.
D. The finished leather can be treated with a surface treatment agent for better results.
E. Note: Do not use DMF dilution, it will affect the foaming effect.
F. Safe shelf life: 2 months(Over 2 months please test it before using).
G. Storage conditions: Strict fireworks, before and after use, please seal, put in a cool and ventilated place, avoid direct sunlight.
